The Steam Tug Part 14.

Very long overdue, but I have made a little progress. First an overall view. You can see here that the wheelhouse is attached to the top of the cabin structure. The roofs for the wheelhouse and the captain’s cabin are loose at present, I have put in a horizontal floor inside the wheelhouse and have … Read more

Update.

Binnacles for November and December 2020 are in the archive.

The Steam Tug Part 13

The future arrives in the post. Six months ago I was cruising the internet, looking at model stuff, and came across a site called Shapeways. I saw this: It’s listed at $19 CAD, unpainted, but look at the detail! But as you know, the steam tug I am building is to 1/24 scale. Anyway, at … Read more

Binnacles for 1990 are in Archive

Unfortunately, we don’t have the one for May at all, and there are pages missing from August and October. But there’s still really good stuff to be found there.

The Steam Tug Part 12

Coffee sticks in action. I have neglected this blog and failed to take some pictures that I should. That said, here’s the state of the build today. Lots more coffee sticks have gone into the build This picture shows the deckhouse upside down. The deckhouse bottom sides were first glued to the frame that was … Read more

The Steam Tug Part 11

Starting the Deckhouse. Bit of a hiatus while I got out the latest Binnacle, and did a couple of additions to the Binnacle Archive. The dining room table has been fully occupied for a couple of weeks by the latest mind-boggling quilt project. Anyway there is now a little progress to report so here goes. … Read more

The Steam Tug Part 10

The Coaming I think I mentioned earlier in this series that I want the superstructure to fit over a coaming around the access hatch. This so that water splashing on the deck cannot readily get into the hull. This time I first glued a 3/8 inch (10 mm) strip of plywood around the underside of … Read more